Installation of Update Rollup 2 for Windows XP Media Center Edition 2005 (KB900325) failed with Error Code: 0x643

  Installation of Update Rollup 2 for Windows XP Media Center Edition 2005
(KB900325) failed with Error Code: 0x643

I have done a lot of reading and tried the following strategies without
success:

...Reinstall of update
...Repair of .net framework 2 then reinstall
...Uninstall .net framework 2, reinstall then install fix.

Attached is an extract from the KB900325 update install log where I first
see failure error messages.

If Anyone can suggest a way forward I will be grateful.

Regards,

Brian

.....
.....
.....
4.625: Source:C:\WINDOWS\system32\DllCache\SET3F7.tmp (5.1.2600.2703)
4.625: Destination:C:\WINDOWS\system32\DllCache\netshell.dll (5.1.2600.2180)
4.641: SetProductTypes: InfProductBuildType=BuildType.IP
4.641: SetAltOsLoaderPath: No section uses DirId 65701; done.
4.656: DoInstallation: FetchSourceURL for
c:\f0209480c587a5b104\update\update.inf failed
4.656: CreateUninstall = 1,Directory = C:\WINDOWS$NtUninstallKB900325$
4.672: LoadFileQueues: SetupGetSourceFileLocation for halaacpi.dll failed:
0xe0000102
10.313: BuildCabinetManifest: update.url absent
10.328: Starting AnalyzeComponents
10.328: AnalyzePhaseZero used 0 ticks
10.328: No c:\windows\INF\updtblk.inf file.
10.328: SetupFindFirstLine in LoadExclusionList Failed with error:
0xe0000102
10.328: SetupFindFirstLine in LoadExclusionList Failed with error:
0xe0000102
12.172: SetupVerifyInfFile failed with error 0x490 for oem3.inf of device
DISPLAY\VSC5A16&1592B4F2&0&10000080&01&00
18.891: OEM file scan used 8563 ticks
24.516: AnalyzePhaseOne: used 14188 ticks
24.516: AnalyzeComponents: Hotpatch analysis disabled; skipping.
24.516: AnalyzeComponents: Hotpatching is disabled.
25.469: AnalyzePhaseTwo used 953 ticks
25.469: AnalyzePhaseThree used 0 ticks
25.469: AnalyzePhaseFive used 0 ticks
25.469: AnalyzePhaseSix used 0 ticks
25.469: AnalyzeComponents used 15141 ticks
25.469: Downloading 0 files
25.469: bPatchMode = FALSE
25.469: Inventory complete: ReturnStatus=0, 20813 ticks
25.469: Num Ticks for invent : 20813
25.469: Allocation size of drive C: is 4096 bytes, free space = 75329171456
bytes
25.500: AnalyzeDiskUsage:  Skipping EstimateDiskUsageForUninstall.
25.500: Drive C: free 71839MB req: 43MB w/uninstall: NOT CALCULATED.
25.500: CabinetBuild complete
25.500: Num Ticks for Cabinet build : 31
25.500: LoadFileQueues: SetupGetSourceFileLocation for halaacpi.dll failed:
0xe0000102
41.172: Num Ticks for Backup : 15672
104.953: Num Ticks for creating uninst inf : 63781
104.953: Registering Uninstall Program for -> KB900325, KB900325 , 0x0
104.969: LoadFileQueues: SetupGetSourceFileLocation for halaacpi.dll failed:
0xe0000102
105.047: System Restore Point set.
105.047: Copied file:  C:\WINDOWS\system32\spmsg.dll
105.047: PFE2: Not avoiding Per File Exceptions.
106.063: GetCatVersion:  Failed to retrieve version information from
C:\WINDOWS\system32\CatRoot\\KB900325.cat
with error 0x57
106.078: GetCatVersion:  Failed to retrieve version information from
C:\WINDOWS\KB900325.cat with error 0x80092004
106.313: Copied file:  C:\WINDOWS\system32\encdec.dll
106.406: Copied file (delayed):  C:\WINDOWS\system32\SET4B4.tmp
106.438: Copied file:  C:\WINDOWS\system32\mpeg2data.ax
106.516: Copied file:  C:\WINDOWS\system32\sbe.dll
.....
.....
.....

 Brian,

See if this MSKB resolves the issue :
http://support.microsoft.com/kb/822798

Start with Method 2 than Method 4. If that doesn't resolve it, do Method
1 and then Method 3.

MowGreen  [MVP 2003-2006]
===============
  *-343-*  FDNY
Never Forgotten
===============

Brian J wrote:

C:\WINDOWS\system32\CatRoot\\KB900325.cat

  No, tried all 4 options without success.

What made you think it was Crypto?

BTW:   KB822798 Option 1 can only be performed if the Crypto service is stopped
first.

Regards

Brian

 Brian,

I am having exactly the same problem that you are. I have also tried all the
fixes you diescribe below as well as other fixes from this newgroup. Did you
ever find a fix for your problem?

Also, I don't know how to view the windows update install log. How do you do
this?

"Brian J" wrote:

 I am having the same trouble also, but I'm not familiar with the process that
was described below and therfore I'm afraid to try it.  Has anyone else found
a simple solution?

"Bruce T" wrote: